You can also push music from iTunes running on any computer that is connected to the same network. Note that the AirPlay button is in a different location if you are using an iPad. ![]() Select the Airport Express that is connected to the T1 speakers. The iDevice will display a list of devices connected to the network.This is located in the lower right corner of an iPhone or iPod. Select the same network as that of the Airport Express.Plug the other end into the ‘ANALOG IN’ or ‘OPTICAL IN’ connector on the back of the T1 active speaker. ![]() Plug one end of a 3.5 mm to 3.5 mm stereo cable or TOSLINK® to mini TOSLINK® (3.5mm) into the audio mini-jack connection on the Airport Express. Plug the Airport Express into the convenient ‘AC OUT’ auxiliary power connector on the back of the T1 active speaker or into a nearby power outlet. For more information on how to set up your Airport Express, visit Apple’s website.Ĭonnect the Airport Express to the Transparent One Active Speaker You can configure your Airport Express using your iOS device, Mac or PC. These instructions assume that the Airport Express device is already set up as you want it configured. The analog output of the newer Airport Express models work as expected, and are compatible with Vanatoo speakers.Īpple’s Airport Express can be set up as its own network to hear music stored locally in your device, or you can connect up to your home network for listening to streaming music over the internet. The models newer than A1264 have dropouts on their optical output that make them incompatible with Vanatoo optical inputs. Note: Vanatoo recommends Airport Express Model No. There are two ways to connect the Airport Express to the Transparent One (T1) speakers.ĭigital connections preserve the integrity of your music better because your music stays digital from its source to the digital amplifier, minimizing the number of times the music gets converted between analog and digital. You can do also push music wirelessly to the Airport Express from a Windows PC running iTunes (see below). ![]() You can push music wirelessly to your Transparent One speakers from your iPhone, iPod Touch, iPad, MacBook, Mac Pro, or Mac mini using the Apple Airport Express® and Apple AirPlay® technology. Power up the older Express and you should be all set.Play Music Wirelessly Using the Apple Airport Express Now you can disconnect the Ethernet cable that you used for the setup and move the older Express to a location that is about half way between the new Express and the general area that needs more wireless coverage. When you see the message of Setup Complete, click Done. Open Macintosh HD > Applications > Utilities > AirPort Utility on your MacĬlick on the Other Wi-Fi Devices button, then click on AirPort Express xxxxxxxĪirPort Setup will open up and take a minute to analyze the network and announce that the A1264 Express will be configured to extend the new AirPort Express network.Įnter a device name that you want to use for the older Express and click NextĪirPort Setup will configure the older Express for you. Allow a full minute for the Express to restart to a slow, blinking amber light. Power up the older Express for a few minutes, then hold in the reset button on the side of the Express for 10 seconds and release. Temporarily, connect an Ethernet cable from your Mac to the older A1264 AirPort Express
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |